Training & Service
Training & Service
Operator training, installation, commissioning and on-site service for the HCI machine family — GMG Technic technical service and training support.
Operator Training & Technical Service
Efficient and long-lasting operation of HCI converting equipment is possible through correct operator training, periodic maintenance and rapid on-site intervention. GMG Technic offers an integrated service chain that starts with installation + commissioning processes and includes basic operator training, advanced adjustment procedures and spare parts supply.
Training Video Library
The 9 modules below are original operator training films prepared by HCI. The upload process to our YouTube channel is ongoing; as soon as they are published, they can be watched embedded in this area.
Tension Parameters
Kaynak: GMG Technic resmi YouTube kanalı
Calibration of tension parameters and correct adjustment principles on slitting and lamination lines. Basic operator training module.
Speed Correction
Kaynak: GMG Technic resmi YouTube kanalı
Speed deviation detection and correction procedure; main motor / auxiliary drive synchronization, line balance.
Web Guide Adjustment
Kaynak: GMG Technic resmi YouTube kanalı
Positioning, calibration and verification of the web guide (edge guide) sensor.
EPC / LPC Adjustment
Kaynak: GMG Technic resmi YouTube kanalı
General machine setup: pre-setting, start-up parameters and operator checklist.
Unwind Tension Re-adjustment
Kaynak: GMG Technic resmi YouTube kanalı
Re-adjustment of the unwind unit tension system — load cell sensor and air-brake integration.
Air Shaft Maintenance
Kaynak: GMG Technic resmi YouTube kanalı
Air shaft maintenance, air tube replacement and leak testing.
FP-250 Sleeve Seaming — Peristaltic Pump
Kaynak: GMG Technic resmi YouTube kanalı
Operator training module from the HCI training library.
FP-250 Sealing Operation (20mm)
Kaynak: GMG Technic resmi YouTube kanalı
Operator training module from the HCI training library.
FSP-250-2 Air Leak Detect — Shrink Sleeve Doctoring
Kaynak: GMG Technic resmi YouTube kanalı
Operator training module from the HCI training library.
Model-Specific Training Resources
Some training modules are prepared specifically for particular machine models. The relevant detail pages contain model-specific additional documentation and training materials.
FSL-TX — Slitter Rewinder
Economical and efficient slitting in the 800-1300 mm rewind OD range; the HCI demo machine most frequently exhibited at international trade fairs.
View Details ›FP-X250-2 — Turret Rewind Shrink Sleeve
A turret rewinder capable of automatic roll pick-up + changeover at high speed; an advanced operator training module for shrink sleeve seaming.
View Details ›GMG Technic Service Scope
Installation & Commissioning
On-site installation after new machine delivery, electrical / pneumatic connection checks, first production test and initial operator training.
Periodic Maintenance
Preventive maintenance carried out at the manufacturer-recommended intervals — bearing / shaft inspection, air system leak testing, sensor calibration, software update check.
Fault Response
Rapid on-site intervention during production stoppages; remote diagnostics, phone / video support and, when necessary, dispatching a team on-site.
Spare Parts Supply
Genuine HCI spare parts supply and inventory management; a Türkiye stock recommendation for critical consumable parts.
Operator Training
Operator training in basic, advanced and specialized modules; on-site training or classroom training options at the GMG Technic application center.
Software & Automation
PLC / HMI software updates, parameter backup, automation integration overhauls.
Service Request & Training Planning
Create a service call for your HCI machine, or let us plan your operator training program.